Produktai skirti šilko gipso grupė (32)

SATEN is a fine gypsum-based skim coat compound for manual application on different types of substrates. Application: • Filling into small gaps and overhauls • Suitable for complete skim coating • Application in premises with normal humidity • It provides a smooth and high-quality surface of interior walls and ceilings, ready for finishing coatings and decorations Advantages: • Creates a perfectly smooth surface • Fills minor damages to 5 mm and cracks on plasterboards or other surfaces • Economical because of the thin layer that has to be laid TECHNICAL INFORMATION: In compliance with EN 13279-2:2014 : Type 3B • Paper bag: 10 kg / 25 kg • Mixing Ratio: ~ 7.5 l water: 10 kg; ~ 18 l water: 25 kg • Coverage: ~ 11 m²/ 10 kg; ~ 29 m²/ 25 kg • Consumption: ~ 0.85 kg/m² • Bond strength: 0.5 MPa • Bags per pallet: 60 pcs / 40 pcs • Pallet weight: 600 kg / 1000 kg Sizes (kg):10 / 25

DÉFINITION TECHNIQUE Enduit décoratif à projeter en pâte prête à l’emploi pour un usage en murs et plafonds intérieurs. Permet de rattraper dans une certaine mesure les défauts du support tels que bullages et balèvres. Peut être appliqué en tant qu’enduit de lissage ou en relief structuré type « gouttelette ». Différentes teintes et qualité lavable sur demande. DOCUMENTS À CONSULTER DTU 59.1. PV CSTB N°R.A.97.179 : classement au feu MO. COMPOSITION ET ASPECT Résine acrylique en émulsion, charge minérale, dérivés cellulosique, agent de conservation et divers adjuvants. La pâte est de couleur blanche et de consistance adaptée à la projection mécanique. CARACTÉRISTIQUES TECHNIQUES • Extrait sac : 72% • Densité : 1,6 SUPPORTS ADMIS Béton plus ou moins bullé, béton brut de décoffrage, béton cellulaire, carreaux de terre cuite, première couche lissée de SOLIDECOR, agglos, enduits plâtre, anciennes peintures, enduit ciment, carreaux de plâtre, plaques de...

Osmocem SCK Fiber-reinforced monocomponent cement mortar, based on hydraulic binders, superprogoline fillers, selected fine aggregates and crystallizing reagent agents, which favor the penetration of the compound into the support. Ideal for low-thickness protective coatings (4 to 10 mm), with high counterweight adhesion. The specific formulation makes this product ideal for coatings in aggressive environments in contact with chlorides and sulphates (sewage systems). Packaging: 25 kg bag UM: €/kg

W: 270 ÷ 290. Farina di tipo ‘0’ (disponibile anche '00' con minimo d'ordine di 1 bancale) ottenuta da grani europei selezionati, dotata di plasticità e forza. E’ ideale per impasti diretti a media lievitazione. 10KG E 25KG

Bitumer Flexigum PU ist eine zweikomponentige Bitumen-Polyurethan-Verbindung, die eine dauerhaft flexible und chemisch beständige Befestigungs- und Spannungsübertragungsmasse bildet. Bitumer Flexigum PU findet seinen Einsatz in: •zur dauerelastischen Befestigung der Schiene als Unterboden, •Schienenbefestigungsmasse und als Unterbodenbelag, •zur Herstellung dauerhafter und flexibler Dehnungsfugen zwischen Betonplatten und Elementen aus Stahl, •Ausfüllen der Lücken zwischen Fahrbahn und Schiene, •zum Füllen von Beton-Beton-Fugen •Verfüllen von Fugen, Lücken, Rissen und Dehnungsfugen in stark bearbeiteten Asphalt- und Betondecken (z. B. Bordsteine ​​auf Brücken), •Verfüllen von „arbeitenden“ Fugen auf Stahl- und Betonbrücken und anderen Gehwegen, die durch starke Bewegungen gekennzeichnet sind.

Gomastit 407 is a sealant based purely on silicone for joints in the natural stone and parquet area, as well as for connections of various construction materials. Gomastit 407 is mouldresistant, as well as UV and weather resistant. This product is easy to process and ensures durable sealing. Gomastit 407 is mechanically resilient and can be walked on. Usage:Facades, Sanitary, Interior construction, Floor

Miglioratore per fermalievitazione, adatto a paste lievitate, pani prelievitati o precotti destinati alla surgelazione. Formato:10 kg Dosaggio:1%

ENTEGRE Moulding Plaster - Plaster of Paris APPLICATION FIELD It is used in casting of requested models for decorative purposed and mounting of decorative gypsum plaster product to wall. It is also used in repair, restoration and renewal in housing and business places thanks to early freezing quality.

* It is applied in 2 cm thickness. * 1 package of product is 20 kg. 1.6-1.8 kg of product is required for 1 m2 area. * You can easily reach an application area of ​​12 m2 by using a 20 kg Multiyap and a 6 mm notched trowel. * By providing waterproofing, even if the joint fillings between the tiles deteriorate, water does not leak to the lower floor. * There is no need to make water isolation in bathroom applications. * Since it is a hydrophobic product, a single product provides both water isolation and a strong tile ceramic application with superior performance. * It is quite light. It reduces labor and transportation costs. * It is flexible and the working time is extended. * It has strong adhesion feature.

Spécifique pour les produits difficiles à démouler, par exemple riches en sucre et en protéine. Excellent pouvoir anti-adhérent. Viscosité :700 à 1100 mPa.s (25°C) Valeur d’iode:± 80 Point de fumée:230 °C POIDS SPECIFIQUE:920 kg/m3 (20°C) Formats disponibles:10L – GRV 1000L

COMPLEXFLUIDE ha sido especialmente diseñado para inducir y estimular el desarrollo óptimo de las plantas para obtener resultados más rápidos y efectivos en el metabolismo. Actúa rápido y es altamente compatible con mezclas para aplicaciones foliares. La sinergia formada entre el PHC y los macroelementos NPK favorece la asimilación de estos nutrientes, mejorando el proceso fotosintético, lo que contribuye a un mayor crecimiento vegetativo y una fructificación de mayor calidad. Packs de: • 1000 L • 20 L • 10 L • 5 L Nitrógeno (N) total :6% p/p Nitrógeno (N) uréico:4% p/p Nitrógeno (N) amoniacal :2% p/p Pentóxido de Fósforo (P2O5) soluble en agua:6% p/p Óxido de Potasio (K2O) soluble en agua:6% p/p Cloruro (Cl):<0,3 Ph:6,5-7 Densidad (gr/cc):1,19

Kälte- und Wärmeträgerflüssigkeit auf Basis Monoethylenglykol für technische Anwendungen

TROPACK Trockenmittel binden Feuchtigkeit durch physikalische Kräfte in ihren Strukturen ein, die als Schichten, Poren und Kanäle aufgebaut sind. Trockenmittel sind nicht wasserlöslich. Je nach Anwendung kann das passende Trockenmittel anhand seiner speziellen Eigenschaften und verschiedenen Formen und Körnungen geliefert werden.

Premixed adhesive based on cement class C2 TE S1 for the indoor and outdoor installation of floor and wall coverings, with high workability, extended open time and increased adhesion and good capacity to absorb the substrate’s deformation, zero vertical slip. Specific for floor and wall coverings also non-absorbent, natural stones, overlapping non-absorbent materials, large formats on large surfaces screeds with insertion of underfloor heating, for application of porcelain stoneware at low thickness.

Suitable for professional Silicate Interior Wall Paint can be applied universally to viable lime- and cement plaster, concrete, brick and woodchip textured wallpaper. The solvent-free, silicate-enriched wall paint is specially made for these types of surfaces. Its special composition creates an inseparable microporous bond with the substrate. This silicification results in perfect adhesion and produces extremely strong durability even on critical substrates. Highest color stability: A1 (FB-Code, BFS-MB Nr. 26).

BİNBİR ÇEŞİT REKLER

Acrylic copolymer is an emulsion-based, silicone-folded, textured, thick-grained exterior wall coating material. It adheres very well to surfaces, does not crack and flake, and does not fade. It ensures that the moisture on the wall is expelled with its ability to breathe with its waterproof properties.

CAS: 910463-68-2 Formula: C187H291N45O59 Molecular Weight: 4113.58Da

Hochelastischer Silikon-Dichtstoff mit sehr guter Haftung auf nahezu allen bauüblichen Untergründen und Materialien Ideal für Anschluss- und Dehnungsfugen im Bau- und Montagebereich, z. B. an Balkonen, Terrassen und Fenstern (Metall-, Holz- oder Kunststoffrahmen) sowie für Abdichtungen zwischen Beton- und Fassadenbauteilen. Neutralvernetzend (Alkoxy) Sehr gute Haftung auf vielen Baumaterialien Dauerhaft elastisch Nicht korrosiv gegenüber Metallen Schnelle Hautbildung und Durchhärtung Geruchsarm UV- und witterungsbeständig Inhalt: 300 ml EN 15651-1: F-EXT-INT-CC EN 15651-2: G

Product details: forms flexible, elastic grid, which is able to stretch and glue provides natural maturation of both lower and upper tiers of technical and legume crops breathing and photosynthesis of the plant are free promotes accumulation of oil in oilseeds and protein in legumes over the last 3-4 weeks, etc. sorbent-carrier, antistressant and increases the drought tolerance of plants Active substance: Composition of natural biopolymers with adhesive properties Organic certification: Product is certified by Organic Standard in accordance with the standard for the production of excipients, that can be used in organic agriculture and processing (taking into account the requirements of the Standard that is equivalent to EU Regulations 834/2007 and 889/2008) Application methods: ground spraying, aerial treatment; Rate of application: Rape, mustard 0,7-1,5 l/ha, soy,pea,bean-1,0-2,0 l/ha, horticultural crops,berries- 1,0-2,0 l/ha Shelf life: 3 years at 0 °C - 20 °C.

Neutrale silicone door zijn hoge viscositeit en body bijzonder gemakkelijk verwerkbaar en afwerkbaar. Trekt geen draden en is uiterst wrijfvast. Speciaal ontwikkeld voor afdichtingen in vochtige ruimtes zoals badkamers, keukens... en uiterst geschikt voor het voegen van tegels.

FIX is a gypsum-based adhesive that is used for direct fixing of all types of plasterboards on walls made of concrete, aerated concrete, bricks, etc., in premises with normal humidity. Application: • Drywall linings without supporting structure • Shaping of window and door openings • Filling of cavities greater than 3 mm • Application in premises with normal humidity Advantages: • High strength • Fast gathering of strength • Excellent traction with the base • Easy and effective work TECHNICAL INFORMATION: In compliance with EN 14496:2017 : Type 3B • Paper bag: 25 kg • Mixing Ratio: ~ 13 l water : 25 kg • Coverage: ~ 5 m²/ 25 kg • Consumption: ~ 5 kg/m² • Bond strength: 0.23 MPa • Bags per pallet: 40 pcs • Pallet weight: 1000kg Sizes (kg):25

Quickly binding building gypsum for direct application. It is used for filling holes, mounting electrical installations, skimming rough coatings, or other proper substrates with normal bearing capacity. Application: • Fixing of electrical cables • Suitable for complete skim coating • Suitable for bonding gypsum ornaments Advantages: • Compatibility with all types of masonry and concrete works • Excellent adhesion • High resistance • Fast gathering of strength • Easy and effective work TECHNICAL INFORMATION: Mixing Ratio Coverage Consumption Bags per pallet Pallet weight (gypsum/water) 5 kg 1/0.55 ~ 5 m2/ 5 kg 1 kg / m2 / 1 mm 120 pcs 600 kg 25 kg 1/0.55 ~ 25 m2/ 25 kg 1 kg / m2 / 1 mm 40 pcs 1000 kg Sizes (kg):5 / 25

SPRINT PLUS is a lightweight gypsum-based machine plaster for one-layer application on interior walls and ceilings in premises with normal humidity. Lighter formula with perlitе ensuring fast laying and economical consumption. Application: • Surfaces that are ready for painting, laying wallpaper or proper decorative plasters and finishing skim coats • Perfect for laying on oven and red bricks, cement and lime-sand blocks, roughened concrete • Suitable for all types of machines for fine plasters Advantages: • If processed with a water scraper, high smoothness is achieved and there is no need for additional skim coating • High content of gypsum for maximum elasticity TECHNICAL INFORMATION: In compliance with EN 13279-2:2014 : Type B4/50/2 • Paper bag: 30 kg • Mixing Ratio: ~ 18 l water: 30 kg • Coverage: ~ 3.5 m²/ 30 kg • Consumption: ~ 8.5 kg/m²/10 mm • Bond strength: 0.15 MPa • Bags per pallet: 40 pcs • Pallet weight: 1200kg Sizes (kg):30

Liquid product based on lithium silicates, which was created for the protective, consolidating and porosity reducer treatment of concrete, mineral, brick and stone substrates. It guarantees optimal durability and adhesion strength, resistance to UV rays, chemical agents and mechanical stresses. The result of the application allows to obtain a rapid hardening of the surface as well as a revived and homogeneous appearance of the same. The product has a negligible environmental impact thanks to the low VOC content (<50 g / l) and is practically odorless. Protective, reinforcing, water repellent treatments of concrete, mineral and stone supports. Specific product for revitalizing, simultaneously providing a great consolidation and an annulment of the dust produced in concrete supports, interstices, brick, stone or mixed arches, present in taverns, public premises and of historic monuments interest. The application surfaces should be clean, free of incrustations, dust etc. A preliminary wash with distilled water or steam it's recommended. The support should be dry when applying. Apply the product as it is, with low pressure sprayer or brush with long bristles. Keep the substrate wet with Consilex Idrofix for at least 20 minutes during application. If applied on floors, wait 24 hours before passing on the treated support. The reinforcing contribution will be completed after 2-3 weeks of treatment. From 0,20 to 1,00 kg of Consilex Idrofix per square meter of surface to be treated, based on the porosity of the support.

Grout CR Composite , castable, anti-washout, controlled shrinkage cement mortar, superfluid consistency, based on high-resistance cements, superpozzolanic fillers (MICROSIL 90), polymeric modifiers, shrinkage resistant agents, specific additives, calcium silicate mineral fibres, selected silica aggregates. - Based on of thickened silica fume - three-dimensionally reinforced fibre with mineral and synthetic fibres - Provides high adherence and adhesion - dimensionally stable (shrinkage-compensated) - Provides high stability-physical chemical and resistance to chlorides and sulphates - suitable for underwater castings: it is anti-washout - high strength in terms of hydrostatic positive and negative thrust. Repair and protective coatings of hydraulic structures, marine and underwater structures, and articles in critical situations: harsh chemical-physical, leaching water, marine atmosphere, etc. Filling of formwork for the containment of cast immersed in sea water. In case of underwater application, the installation operations must be carried out within 8-10 hours of cleaning and "fouling" (accumulation and deposits of organic and inorganic particles on product surfaces) removal. An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). Pour 2/3 of total mixture water in the cement mixer, gradually add the product and the remaining water, until a homogeneous mixture of the required consistency is obtained. For sizable filling thicknesses, greater than 60 mm, Ghiaietto 6.10 (inert washed is selected with a particle size of from 6-10 mm) can be added in a percentage ranging from 20% to 40 %, on the basis of practical requirements. In some particularly demanding cases in terms of the resistance to the "dry-wet" cycle (for example, for the action of the tides) or for chemical attacks particularly strong, it would be advisable to add, in addition to the gravel, even thickened silica fume(MICROSIL 90), and in a variable amount depending on the thickness and construction-related need, to further improve the waterproofing and the mechanical strength of the product. In these cases, please contact our Technical Service. In the case of casts in water, make sure of perfect product hardening before removal of the formwork. Approximately 20,50 kg/m² of Grout CR for every centimetre of thickness to be implemented (approximately 2050 kg per cubic metre). Packaging: 25 kg bag UM: €/kg

Grout 2 HP Grout 2 HP is a pourable, fiber-reinforced mortar, used for structural restoration operations, anchoring of steel bars and strands, reinforced micropiles, tie rods, and riveting. The formulation contains very fine high-strength cements, micro-silicas with pozzolanic activity, aggregates in a rational granulometric curve (0.1 ÷ 1.8 mm), and special antisegregative additives. The product is mixed with 11% - 12% of water, requiring vigorous and prolonged mechanical mixing. The special formulation of Grout 2 HP provides the castings with mechanical strength, fracture energy, exceptional durability, and very high chemical-physical resistance. Grout 2 HP has a workability time of about 60-90 minutes, after which the setting process is triggered, followed by progressive hardening. The plastic and hygrometric shrinkage is extremely low thanks to the presence of Readymesh PM-060 multifilament synthetic fibers, which provide volumetric stability. The performances that make Grout 2 HP unique are: • very high compressive mechanical strengths (> 90 MPa at 28 days), • very high mechanical resistance to bending-traction (> 12 MPa after 28 days), • excellent durability and resistance to chemical attacks. Grout 2 HP is used for structural restoration operations, anchoring of steel bars and strands, reinforced micropiles, tie rods, and riveting. It is particularly suitable for operations where high mechanical performance is required after short curing (compressive strength at 3 days > 60 MPa) and in operations carried out in severe exposure environments (XC - XS - XF), characterized by aggression from sulphates, chlorides, and nitrates. The material can also be used for repairs in anchoring areas subject to high stresses. The application surfaces must be clean, free of dirt, crumbly and incoherent parts, dust, etc., and suitably saturated with water until reaching the condition of "saturated with dry surface". Adequate roughening of the surfaces by scarifying, sandblasting, etc. is always necessary to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). It is strongly recommended, for optimal performance of site operations, to use a vertical axis mixer with planetary movement or a double horizontal helicoid. The powder is mixed with drinking water to the extent of 11% - 12%, referring to the total weight of the mortar (about 2.75 liters per 25 kg bag) until a homogeneous mixture is obtained. Mixing time: about 4 minutes with a high efficiency mixer. The anchoring can be filled with a single screw pump, for mortars. Pumping must be carried out at a controlled speed to ensure a low working pressure. In case of restorations, the surface must be protected, after application, by polyethylene sheets or anti-evaporation treatments. Packaging: 25 kg bag Unit of Measure: €/kg

DÉFINITION TECHNIQUE Enduit décoratif à projeter garnissant en pâte prête à l’emploi pour un usage en murs et plafonds intérieur. Permet de rattraper des défauts du support tels que bullages et balèvres. Peut être appliqué en tant qu’enduit de lissage ou en relief structuré type « gouttelette ». Spécialement conçu pour débuller les bétons et rattraper les défauts de planimétrie. DOCUMENTS À CONSULTER DTU 59.1. COMPOSITION ET ASPECT Résine acrylique en émulsion, charge minérale, dérivés cellulosiques, agent de conservation et divers adjuvants. La pâte est de couleur blanche et de consistance adaptée à la projection mécanique. CARACTÉRISTIQUES TECHNIQUES • Extrait sac : 72% • Densité : 1,85 SUPPORTS ADMIS Béton bullé, béton brut de décoffrage, béton cellulaire, carreaux de terre cuite, agglos, enduits plâtre, anciennes peintures, enduit ciment, carreaux de plâtre, plaques de plâtre. CONDITIONNEMENTS Sacs plastique de 25kg avec poignée. REVÊTEMENTS SOLIDECOR. Peinture...

COMPOSITION ET ASPECT Blanche. CONDITIONNEMENTS Cartouche de 290 ml. STOCKAGE 12 mois à l’abri du froid et des fortes chaleurs en emballage d’origine non entamé. CARACTÉRISTIQUES TECHNIQUES • Matières premières : MS Polymère • Système de durcissement : par l’humidité • V itesse de durcissement : 2,5 à 3 mm par 24 h. (à T=23°C et 50 % HR) • Formation de peau : 10 à 15 minutes (à T = 23°C et 50 % HR) PRÉCAUTIONS D’EMPLOI Ne pas travailler en dessous de +5°C. Conserver hors de portée des enfants. Contient : N-(3-(trimethoxysilyl)propyl)ethylenediamine - Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacaat - Methyl1,2,2,6,6-pentamethyl-4-piperidyl sebacaat. Peut déclencher une réaction allergique. PRÉPARATION DES SUPPORTS Les supports doivent être propres, secs, dépoussiérés et dégraissés. APPLICATION Appliquer la colle en extrudant un cordon ou des points sur le support ou l’élément à coller. Assembler les matériaux le plus vite possible : maxi 10 minutes. • Poids spécifique...

DÉFINITION TECHNIQUE Colle mastic acrylique en dispersion aqueuse, prête à l’emploi, pour revêtements muraux isolants et éléments décoratifs. COMPOSITION ET ASPECT Résine acrylique en émulsion, agent tackifiant, épaississant et divers adjuvants. La pâte est de couleur blanc cassé. SUPPORTS ADMIS • Murs et plafonds en intérieur • Béton • Enduit ciment • Plaques de plâtre • Carreaux de plâtre • Ancienne peinture • Sous-couche d’impression CARACTÉRISTIQUES TECHNIQUES • Temps de gommage : 5 mn • Temps ouvert : 20 minutes • Temps de prise : 24 à 48 heures • Densité : environ 1,4 • Extrait sec : 75% REVÊTEMENTS • Polystyrène expansé ou extrudé (panneaux, dalles, plaques, etc...) • Éléments décoratifs en polystyrène ou polyuréthane : rosaces, corniches, moulures, etc • ”Aluminium - polystyrène” (collage face aluminium) • Liège • Isolants (Dépron...) CONDITIONNEMENTS Seaux de 1,5 et 7 kg sur palette houssée. STOCKAGE 6 mois à l’abri du froid et des fortes chaleurs en...